Learning and Discussion of Innovative ideas about Mining Waste Management and also Mining Related News and Activities

  • Mine Waste Management Training

    Mine Waste Management Short training sponsored by Government of Japan through JICA in corporation with the Government of PNG through CEPA, MRA and DMPGM.

  • Mount Sinivit Mine

    Acid mine drainage (AMD) continues to flow from the abondoned workings (mine). It is of two types and they are Mine Drainage from underground and open-pit and the seepage water from waste dump and tailings dam.

  • Mining Warden Hearing at Ok Isai Village, Frieda River, East Sepik Province, PNG

    Landowner grievances is always a challenge for the PNG Mining Industry. However, the Regulators of the Mining Inductry facilitate Mining Warden Hearings and Development Forums to address grievances related to mining.

  • Osarizawa Underground Mine Adit

    Osarizawa Underground Mine is an abandoned mine in Akita Prefecture, Japan. Event though the mine is closed, the mine site is kept for sightseeing purposes.

  • Hidden Valley Tailings Storage Facility (TSF)

    Mine Waste refers to the waste related to mining activities such as tailings and waste rock. Management refer to how the mine derived waste is managed by the operator and or the Regulatory Body.

Monday, 16 December 2019

Introduction to Mineral Processing- Questions and Answers


S
1.       Write down the main objective and technological summary of mineral processing on mining industries.

The main objective of mineral processing in mining industries is to separate the gangue minerals from the valuable or target minerals or the desired minerals. The desired or valuable minerals are fixed within the ore. The target minerals are to be liberated from the ore and gangue minerals are disposed of.

The summary of the mineral processing technology is in the following sequence:
·        Rock drill & blasting of Ore
·        Crushing & Grinding (Liberation)
·        Sieving & Classification
·        Separation, Extraction, Concentration
·        Concentrate & Metallurgical Treatment
 
 2.       Describe what kind of technology is important for securing resources (or resource supply), including the reason and your idea.

The crushing and grinding technology is very important in securing resources because without crushing or grinding you cannot go further. Crushing and grinding are the only primary actions for further downstream processing. After crushing and grinding you can look for other alternatives of screening and separation and further downstream processing techniques that suites the recovery of target mineral.

For example, you can’t recover in-situ or ROM gold by leaching if there is no fracture to expose gold surface interaction with cyanide solution.  You cannot proceed with flotation if you have not crushed and ground the materials to expose the surface of mineral particles 

3.       It is required to process a low grade ore in which the primary mineral is chalcopyrite associated pyrite. Suggest a process flowsheet, a reagent scheme and a set of operating conditions that may optimize the recovery of copper while minimizing the recovery of pyrite. Explain the reason that led to your decisions.

Froth Flotation process is best for recovering Chalcopyrite. Both Chalcopyrite and pyrite are in pregnant solution at lower pH value. In order for us to separate Chalcopyrite from pyrite, we need to regulate the pH value in the flotation. This can be done by introducing lime and alkaline reagents into floatation thank so that the pH is increased above 6. The pyrite will then precipitate at pH above 6 and the chalcopyrite floats as bubble which is separated from pyrite.

 4.       What kind of technology development do you think is necessary for the mining and mineral processing, which is expected to become difficult in future?
Describe with your idea.

The development of processing technology would be a challenge to recover very low grade ore which is regarded as waste materials or tailings. It is assume that the tailings at least contain some valuable minerals but are hardly recoverable using the metal recovery techniques. It is normally allowed to pass through as tailings into the tailings dams or discharged into the river or on to the seafloor.

Some researchers have come up with proposals to recover low grade ore with a concept of  near zero waste through bio-leaching processing techniques but it will be a challenge whether such technology will truly help to recover very low grade ore mixed with silts and fine particles of rocks and soil.

Share:

Translate

Welcome Mine Mine Waste Management

"Welcome to the minewastes.com. In this site you will discover new and interesting tips about matters related to mine wastes management. You will never regret spending time and contributing in this site as it saves lives of many people in impacted areas. Discover more and contribute Meaningfully to save life."

Featured post

Osarizawa Mine in Akita Prefecture, Japan

Osarizawa Underground Mine Adit Osarizawa mine is an abandoned mine in Akita Prefecture, Japan . Event though the mine is closed, the ...

Related Sites

Contact Us

Name

Email *

Message *

Follow by Email